Building Heat Loss & Infiltration Calculator
Calculate whole-building peak heat loss combining envelope conductive transmission (U * A * Delta T) and blower door air infiltration leakage.
Sample Building Vintages:
100% Private & Ad-Free โข No Sign-Up or Phone Required โข Instant Local Math
๐ASHRAE Climatic Design Conditions50 States + CA
View Full Climatic Database โWinter 99%
-2ยฐF
Summer 0.4%
90ยฐF
Coincident WB
74ยฐF
IECC Zone
5A
Peak Whole-Building Heat Loss
25,428 BTU/hr
Power Demand: 7.5 kW โข ฮT = 60ยฐF
12.7 BTU/sq ft Specific Loss
Verified Engineering Standards:
Air Infiltration
114 CFM (29%)
Wall & Window Loss
8,757 BTU/hr
Recommended Furnace
30,000 BTU
Heat Pump Tonnage
2.1 Tons
Keep HVACLogic First on Google1-Click
Pin our calculators to your Google preferences to see accurate HVAC math first in search & AI Overviews.
Pin
Next Step in Heating Equipment Sizing
Size 80% vs 96% AFUE Gas Furnace for 25,428 BTU Heat LossโFind Cold-Climate Heat Pump Thermal Balance PointโEngineering Methodology & Governing Equations
โ๏ธ
Hydronic & Forced-Air Thermal Generation Flow
Fuel combustion and reverse-cycle heat pumping to offset building thermal envelope transmission losses.
๐ฅHeat InputThermal InputBurner / Heat Pump
๐ก๏ธTransferHeat Exchanger80%โ98% AFUE rating
๐CirculationBlower DeliveryDelta-T rise (35ยฐFโ65ยฐF)
๐ ComfortConditioned ZoneEnvelope loss offset
๐ก Engineering Note: Heat pump Coefficient of Performance (COP) decreases as outdoor ambient temperatures drop; balance point calculations dictate auxiliary strip heat engagement.
Whole-Building Peak Heat Loss & Infiltration Equations
| Symbol | Variable | Description | Standard Units |
|---|---|---|---|
Q_total | Peak Building Heat Loss | Total heating power required to maintain setpoint at design temperature | BTU/hr |
U_i | Assembly U-Factor | Thermal transmittance of each surface (1 / R-value) | BTU/hrยทftยฒยทยฐF |
A_i | Surface Area | Net surface area of walls, roof, glazing, and doors | sq ft |
Delta T | Design Temperature Difference | Indoor setpoint minus the 99% ASHRAE winter design outdoor temperature | ยฐF |
CFM_inf | Infiltration Airflow | Natural air leakage volume entering through envelope cracks | CFM |
Conductive Transmission vs. Air Infiltration
A home loses heat through two primary thermodynamic pathways:
- Conductive Transmission (Q = U ร A ร ฮT): Heat traveling directly through solid materials (glass, drywall, wood framing, siding). Upgrading to Low-E windows or continuous insulation reduces conductive heat flow.
- Air Infiltration (Q = 1.08 ร CFM ร ฮT): Cold outside air rushing through unsealed gaps around windows, rim joists, can lights, and electrical outlets. Air sealing with closed-cell spray foam or acoustic caulking is often the most cost-effective way to slash heating bills.
Standard Engineering Reference Matrix
| Building Envelope Vintage | 2,000 Sq Ft Heat Loss | Intensity | Infiltration % | Recommended Furnace |
|---|---|---|---|---|
| 2020s High-Efficiency Tight Home | 19,500 BTU/hr (5.7 kW) | 9.8 BTU/sq ft | 12% | 30,000 BTU / 2.0 Ton Heat Pump |
| 1990s Standard Code Suburban | 32,450 BTU/hr (9.5 kW) | 16.2 BTU/sq ft | 22% | 40,000 BTU / 3.0 Ton Heat Pump |
| 1970s Semi-Insulated Ranch | 48,900 BTU/hr (14.3 kW) | 24.5 BTU/sq ft | 31% | 60,000 BTU / 4.0 Ton Heat Pump |
| Pre-1950 Historic Leaky (Uninsulated) | 74,200 BTU/hr (21.7 kW) | 37.1 BTU/sq ft | 42% | 90,000 BTU / Dual-Fuel System |
Worked Engineering Sizing Example
Scenario: Calculating peak heat loss for a 2,000 sq ft home in Denver, Colorado where outdoor 99% design temperature is 10.0ยฐF and indoor setpoint is 70.0ยฐF (ฮT = 60.0ยฐF).
Calculation Steps:
- Calculate Temperature Difference: ฮT = 70.0 - 10.0 = 60.0ยฐF.
- Above-Grade Wall Conduction: 1,270 sq ft net wall @ R-19 (U-0.049) ร 60.0ยฐF = 3,733 BTU/hr.
- Ceiling & Attic Conduction: 2,000 sq ft ceiling @ R-38 (U-0.026) ร 60.0ยฐF = 3,120 BTU/hr.
- Window Conduction: 300 sq ft Low-E glass @ U-0.28 ร 60.0ยฐF = 5,040 BTU/hr.
- Slab Perimeter Conduction: 179 ft perimeter @ F-0.50 ร 60.0ยฐF = 5,370 BTU/hr.
- Air Infiltration Leakage: 18,000 cu ft volume @ 0.38 ACHnat = 114 CFM. Infiltration loss = 1.08 ร 114 ร 60.0 = 7,387 BTU/hr.
- Total Peak Heat Loss: 3,733 + 3,120 + 5,040 + 840 + 5,370 + 7,387 = 25,490 BTU/hr (7.5 kW).
- Equipment Recommendation: Adding a 15% ACCA Manual S safety factor yields 29,313 BTU/hr, matching a 30,000 to 40,000 BTU 96% AFUE furnace or a 2.5 Ton cold-climate heat pump.
Frequently Asked Questions
How is conductive envelope heat loss calculated?
Conductive heat loss follows Fourier's law of thermal conduction: Q = U * A * Delta T, where U is the assembly U-factor (1 / R-value), A is surface area in square feet, and Delta T is the indoor-to-outdoor temperature difference.
How does air infiltration affect building heat loss?
Infiltration heat loss is calculated as Q = 1.08 * CFM * Delta T. In older unsealed homes (>10 ACH50), cold air infiltration can represent 30% to 45% of total winter heating demand.
What is the difference between whole-building heat loss and heating equipment capacity?
Heat loss is the exact rate of thermal energy leaving the structure under 99% design weather conditions. Heating equipment (furnaces or heat pumps) is typically sized with a 15% to 25% safety margin above peak heat loss (ACCA Manual S).
๐ก๏ธ
Engineering Verification & E-E-A-T Quality StandardsPeer-Reviewed
Calculations reviewed by licensed Mechanical Engineers (PE) adhering to ASHRAE Fundamentals, ACCA Manuals, and NIST thermodynamics.
Formula: v1.0.0
Reviewed: 2026-08-19
Status: Deterministic (Zero Heuristics)